How to Reset the Epson L495 Printer Waste Ink Pad Error

The Reset Epson Ink Tank L495 becomes necessary when the printer shows alerts such as “Service Required,” “Ink Pad is at the End of its Service Life,” or messages indicating that a printer component has reached its operational limit. According to Epson’s official guidelines, these warnings are generated by an internal protection system designed to prevent excess waste ink from overflowing and to safeguard the internal electronics of the Epson Ink Tank L495.

What should you do when the Epson Ink Tank L495 starts flashing all lights?

If all indicator lights on the Epson Ink Tank L495 begin flashing at the same time, this usually means the printer has entered a protection or lock mode. In most cases, this behavior is linked to the internal waste ink counter reaching its predefined limit. To correctly identify the cause, Epson recommends checking the detailed error message using the official Epson Status Monitor software.

1 – Send any print command to the Epson Ink Tank L495 and carefully observe the message displayed by Epson Status Monitor on your computer screen.

2 – If the message refers to the waste ink pad, internal counter overflow, service required, or end-of-life warning, this confirms the need to perform the Reset Epson Ink Tank L495.

3 – If no warning message appears, the printer drivers may not be installed correctly. Download and install the official Epson Ink Tank L495 drivers directly from Epson.com, restart your computer, and repeat the test print.

How to Reset the Waste Ink Pad Counter on Epson Ink Tank L495

The reset procedure for the Epson Ink Tank L495 is simple and safe when performed correctly. No advanced technical knowledge is required. You only need a Windows-based computer with internet access, the printer powered on, and connected to the computer via a USB cable.

Epson printers, including the Epson Ink Tank L495, use a dedicated service utility to clear the internal waste ink pad counter. This utility is commonly known as the Reset Epson L495 software.

1 – Download the reset software using the secure link sent to the email address provided during the purchase process.

2 – Activate the software using the unique activation key included in the same email, located below the download link and tutorial information.

3 – On the download page, you will also find a complete step-by-step video tutorial. Follow the instructions exactly as shown.
4 – After the reset process is completed, turn off the Epson Ink Tank L495, wait a few seconds, and turn it back on. The printer will be fully unlocked and ready for normal operation.

What Is the Ink Pad Inside the Epson Ink Tank L495?

Inside the Epson Ink Tank L495 there is an internal waste ink absorption system, commonly referred to as the ink pad or waste ink absorber.

Every time the printer is powered on, automatic initialization and printhead cleaning routines are performed. During these operations, unused ink is flushed into the internal ink pad.

In addition, regular printing and maintenance cycles periodically send residual ink into this absorber as part of normal printer operation.

When the ink pad reaches its calculated maximum absorption capacity, the Epson Ink Tank L495 automatically locks itself to prevent ink leakage that could damage internal electronic boards and mechanical components.

To completely resolve this condition, two actions are recommended:

• Clean or replace the internal waste ink pads, or install an external ink drainage system.
• Perform the Reset Epson Ink Tank L495 to reset the internal waste ink counter responsible for the printer lock.

After payment confirmation, you will receive an email similar to the example below.

This email contains your activation key, the official download link for the Reset Epson Ink Tank L495 software, and access to a detailed video tutorial on the same page.

Simply open the download link and carefully follow the instructions to complete the reset process safely.

Why licensed reset software is safer than free alternatives

Common risks associated with free Reset Epson L495 tools:

• Free reset programs often contain malware, spyware, trojans, or other harmful software.

• Many free tools fail during the final reset stage, displaying errors such as “Final 68” or “Final 69.”

• Free versions frequently do not fully reset the waste ink counter, causing the error to return.

• High risk of firmware corruption, which may permanently disable the Epson Ink Tank L495.

Advantages of the Paid Reset Epson Ink Tank L495:

• 100% clean, virus-free, and verified software

• Fast and simple installation on Windows systems

• Unlimited license with lifetime validity

• License transfers allowed between Windows computers

• Professional technical support with remote assistance

• Safe reset that only clears the internal waste ink counter without modifying printer firmware